First Time Setup
================

1. Unpack the kit and verify the contents against your order. 
Here is a sample IFW2 kit.

.. image:: ../images/19355_package_contents-front.jpg

.. note::
    The contents of your kit may vary. Please verify against your order.

2. :doc:`Install your filters. </howto/installafilter>`
3. :doc:`Install your wheel into the housing. </howto/replaceawheel>`
4. Connect 12v power to the housing.
5. Connect the USB, Serial or Hand Controller to the wheel.
6. :doc:`Run the software and connect </introduction/software>` or use the Hand Controller to home and move the wheel.
7. :doc:`Set Filter Names from the software. </howto/setfilternames>`