ISO-10303-21;
HEADER;
FILE_DESCRIPTION (( 'STEP AP214' ), '1' );
FILE_NAME ('17858 - Optec-3600 Receiver to AP 2.7 Female.STEP', '2026-03-26T12:25:48', ( '' ), ( '' ), 'SwSTEP 2.0', 'SolidWorks 2023', '' );
FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
ENDSEC;
DATA;
#393 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
#454 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #3078 ) ;
#776 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
#989 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #3482, 'design' ) ;
#1148 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
#1611 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #3162 ) ) ;
#1618 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000, 0.000000000000000000, 0.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ;
#1660 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #1854 ) ;
#1854 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #3223, #989 ) ;
#1871 =( CONVERSION_BASED_UNIT ( 'INCH', #2394 ) LENGTH_UNIT ( ) NAMED_UNIT ( #1618 ) );
#2183 = PRODUCT_CONTEXT ( 'NONE', #3078, 'mechanical' ) ;
#2394 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999897 ), #1148 );
#2469 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000082E-05 ), #1871, 'distance_accuracy_value', 'NONE');
#3078 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
#3162 = PRODUCT ( '17858 - Optec-3600 Receiver to AP 2.7 Female', '17858 - Optec-3600 Receiver to AP 2.7 Female', '', ( #2183 ) ) ;
#3223 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #3162, .NOT_KNOWN. ) ;
#3482 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
#3747 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #2469 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #1871, #393, #776 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
#3819 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #3482 ) ;
ENDSEC;
END-ISO-10303-21;